ROBOT 501W
Technical Parameter
Cooling mode:Water-cooled
Rated value:500A CO₂/ 450A MIXED GAS
Duty cycle:100%
Diameterof welding wires: 0.8-1.2mm
Angle of gun neck: 31°
Instant stop: The deviation between X axis and Y axis is around 4°
The deviation of the Z axis is around 1mm
Procurement code
BB52-2100-01
Robot welding gun/PAN rear interface
Consumables procurement code(with”🔴”is the standard configuration)
| Position | Code | Description |
|---|---|---|
| 0 | BB52-2100-01 | |
| 🔴 | AA27-31-001 | Water-cooled Torch head/31 °/Standard |
| AA27-31-002 | Water-cooled Torch head/31 °/Long+100mm | |
| AA27-31-003 | Water-cooled Torch head/31 °/Long+250mm | |
| AE11-16-003 | Guide rod/M8/25mm | |
| ICF0524 | Ceramic gas diffuser | |
| XCU0005-78 | 0.8/M8*30/Cr-Zr-Cu | |
| XCU0005-80 | 1.0/M8*30/Cr-Zr-Cu | |
| 🔴 | XCU0005-82 | 1.2/M8*30/Cr-Zr-Cu |
| XCU0005-84 | 1.4/M8*30/Cr-Zr-Cu | |
| XCU0005-86 | 1.6/M8*30/Cr-Zr-Cu | |
| AB51-24-101 | Outer nozzle/Φ16/L=70 | |
| BA03-10-004 | HIT100/Integrated/Double Braided | |
| AF07-030-01 | Integrated U-shaped bracket/short/30 ° hole position | |
| AF07-045-01 | Integrated U-shaped bracket/short/45 ° hole position | |
| AF07-105-02 | Z-bracket/5 °/equipped with 22 hole spacing | |
| AF07-105-03 | Z-bracket/5 °/equipped with 28 hole spacing | |
| AF07-105-04 | Z-bracket/5 °/equipped with 34 hole spacing | |
| AF07-105-05 | Z-bracket/5 °/equipped with 42 hole spacing | |
| AF07-105-06 | Z-shaped bracket body/5 °/with cross hole spacing | |
| AF06-75-001 | Built in flange/customized | |
| AF06-60-001 | External flange/customized | |
| CA08-2100-01 | Water-cooled cable assembly/PAN rear interface | |
| 🔴 | IIC0560-05 | LinerΦ1.2-Φ1.6/1.8 M/Red/ROBOT/EUR |
| IIC0534-05 | LinerΦ1.2-Φ1.6/1.8 M/Black/ROBOT/EUR | |
| 🔴 | IIC0112 | Steel linerΦ1.2-Φ1.6/1.8 M/Red/ROBOT/PAN |
| IIC0113 | Steel linerΦ1.2-Φ1.6/1.8 M/Black/ROBOT/PAN |
